|
A fountain or aerator will provide a beautiful addition to your landscape. The environment and aquatic life will benefit from the replacement of the oxygen level, and the action of destratification by breaking up the growth of algae’s and the associated odors of stagnate water.
We use environmentally friendly sealed pumps with a biodegradable lubrication, should any leakage ever occur.
By using low amp, cost efficient pumps and motors our units typically cost .50 cents to $1.00 per 24 hour period of operation.
Most units only require a dedicated use, 15 amp -115 volt power supply on a breaker.
A GFCI protector is supplied with all our fountains to protect against the chance of electrical shock.
**Note: We never recommend persons or animals being in the
water when the fountain power supply is on.
The next step of anchoring the fountains will require a depth of 3 feet of clear water. Then by using the three molded attachment holes in the float you can use 1/4 inch nylon rope to secure to the shoreline with a stake just below the surface, or with three cement blocks in the pond bottom, with the lines running up to the float.
Installation is simple since all units come pre-wired with plug ends. Usually you will only need a screw driver to complete assembly.
When the sun sets you will really be able to take advantage of the beauty our fountains provide by using our lighting kits to make a lighted show in the air and on the water.
If you have any other questions or comments, please do not hesitate to call or e-mail us so that we can help you enjoy your pond to its full potential.
| 
